Action Corrosion Rust Removal Gel

$38

Rust Removal Gel

Action Corrosion Rust Removal Gel is a commercial grade rust remover & converter. This product is specifically engineered by Action Corrosion to use on their many rust removal projects.

The product is in a thick, gel form to enable it to be brushed onto vertical and horizontal metal surfaces and hold on until the rust is dissolved. This is in contrast to other rust removers you find in hardware outlets, which have a watery consistency and run off before the rust removal is complete. As far as we are aware, this is the only phosphoric acid-based rust dissolver in gel form. The product is simply applied by brush with a thick coat, left for half an hour and rinsed off. As a bath, it can be used over & over again. It is ideal for all steel and is particularly good on heavily corroded stainless steel pipe and rusted stainless steel. For ongoing rust protection, coat cleaned metal with Action Clear or Action Clear Xtreme. Action Gel is also used to remove rust stains off tiles, walls & driveways. This is a proven product, used to de-rust QLD Rail and ARTC Rail Bridges in Australia.

Available in a 250ml, 500ml, 1 litre, 2.5 litre, 5 litre & 20 litre.

  • A thick consistency which allows it to stick to horizontal and vertical surfaces.
  • Simple to apply and wash off.
  • Able to use and re-use as a rust removal bath.
  • Able to remove rust stains on other surfaces such as tiles, walls and driveways.
  • Quick Cure
  • Clear, hard coating
  • Does not affect efficiency
  • Insulates against vermin on PC Boards

MSDS | Data Sheet | Spec Sheet

Rust Remover VS Rust Converter

See the power that our rust remover matched up against this rusted machinery

Recently viewed